Base station antenna conceived by using an innovative feed system studied and applied to have highly symmetrical radiation pattern in both planes (E and H).
It’s completely computer designed to get high performances of gain and front-to-back in the working band. All aluminium parts are protected by anodized treatment, hardware are of Stainless steel or zinc plated steel, mounting bracket is of extruded aluminium for the best strength and the connector is placed in rear position for an easily access. To increase the antenna gain please install it in vertical stacked array
Wide Band, Highly Symmetrical Radiation Pattern
Features:
Base station antenna, Directional
Wide band, Low-gain
Highly symmetrical radiation pattern in both planes (E and H)
Protection from static discharges DC-ground
Made of anodized aluminium alloy
Stacked and bayed array for more gain
Electrical Data
Type: 1/2 λ Dipole
Frequency rangeL 380-470 MHz @ SWR ≤1.5 No tuning required
System: 70cm-HAM, TETRA, CDMA-450, LTE-450, ISM/SIGFOX/LoRa 433MHz
Impedance: 50Ω
Radiation (H-plane): beamwidth @ -3 dB = 200°
Radiation (E-plane): beamwidth @ -3 dB = 68°
Radiation angle: 0°
Front to back ratio: ≥ 8 dB
Polarization: linear vertical
Gain: 2.35 dBd - 4.5 dBi
Max. power (CW) 150 Watts
Grounding protection: All metal part are DC-grounded, the inner conductor shows a DC-short
Connector: N-female with rubber protection cap
Mechanical Data
Materials:Anodized 6063-T5 Aluminium, EPDM rubber, thermoplastic UV stabilized, Chromed brass
Dimensions (L x W approx.): 380 x 340 mm / 1.25 x 1.12 ft
Weight (approx.): 950 gr / 2.09 lb
Mounting mast: On-Mast
This product was added to our catalog on Sunday 21 April, 2024.